Raritan PCS12 Guia do Utilizador descarregar pdf (Página 44)

Chapter 3: Prepare Raritan Devices

Note: The Dominion PX's IP address is automatically displayed in the

system prompt. The default IP address is 192.168.0.192. The default

IP configuration method is DHCP, and the default IP address will be

replaced by the address assigned by DHCP or BOOTP, or the static

IP address you entered, as soon as the configuration process is

complete. To use the factory default IP address, type in none as the

IP autoconfiguration command, and accept the default value. The

default IP address for static (none) configuration is 192.168.0.192.

Type your selection and press Enter. You are prompted to enable IP

access control.

6. By default, IP access control is NOT enabled. This disables the

Dominion PX firewall. Leave the firewall disabled for the present;

later you will enable the firewall from the Web interface and create

firewall rules. See Configure the Firewall.

Note: If you ever accidentally create a rule that locks you out of the

Dominion PX, you can rerun the configuration program and reset this

parameter to disabled to allow you to access the Dominion PX.

7. Press Enter. You are prompted to set the LAN interface speed.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 69 70

Sem comentários

Raritan PCS12 Guia do Utilizador Página 44