Raritan PCS12 Guia do Utilizador descarregar pdf (Página 35)

Chapter 3: Prepare Raritan Devices

1. AC Power

To connect the power supply:

1. Attach the included AC power cord to the Dominion KSX II and plug

into an AC power outlet.

2. Network Ports

Dominion KSX II provides two Ethernet ports for failover purposes (not

for load-balancing). By default, only LAN1 is active and the automatic

failover is disabled. When enabled, if the Dominion KSX II internal

network interface or the network switch to which it is connected becomes

unavailable, LAN2 will be enabled using the same IP address.

To connect the network:

1. Connect a standard Ethernet cable (included) from the network port

labeled LAN1 to an Ethernet switch, hub, or router.

2. To make use of the optional Dominion KSX II Ethernet failover

capabilities:

 Connect a standard Ethernet cable from the network port labeled

LAN2 to an Ethernet switch, hub, or router.

 Enable Automatic Failover on the Network Configuration screen.

See Network Settings, LAN Interface Settings in the Raritan

Dominion KSX II User Guide.

Use both network ports only if you want to use one as a failover port.

3. Local User Port (local PC) and Local Admin Port

For convenient access to KVM target servers and serial devices while at

the rack, use the KSX II Local Access port. While the local port is

required for installation and setup, it is optional for subsequent use. The

local port provides the Dominion KSX II Local Console graphical user

interface for administration and target server access.

To connect the Local User port:

Attach a multi-sync VGA monitor, mouse, and keyboard to the respective

Local User ports (using either a PS/2 or USB keyboard and mouse).

You can use the Local Admin port to connect the Dominion KSX II

directly to a workstation to manage your serial targets and configure the

system with a terminal emulation program such as HyperTerminal. The

Local Admin port requires the use of a standard null modem cable.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 69 70

Sem comentários

Raritan PCS12 Guia do Utilizador Página 35